Gantrail Products

Crane rail fixing clips
Gantrail rail fixing clips allow fine adjustment for alignment but are self locking against the force from the crane. They can be fixed by bolting or welding to the structure. More...

Crane rail pads
Gantrail crane rail pads allow small rail movements at the same time that they reduce stresses on the crane wheel and the rail supporting structure. The Gantrail Mark VII Pad has Continuous Steel Reinforcement Encapsulated in an Environmentally Resistant Elastomer. More...

Rails on concrete - Sole plates, holding down bolts and grout
Rails on concrete need to be mounted on steel sole plates. These are fixed with holding down bolts. Cement, epoxy and polyester based grouts are widely used in supporting and fixing crane rails. Gantrail will design the installation and supply material as required. More...

Crane rails
Gantrail can supply the right rail for the job. Crane and railway rail section shown in standards are not all readily available. More...

Crane girder surge connectors (tie backs)
Cranes in large buildings apply significant forces at the top of the gantry (runway) girders. These forces often cause premature failure of traditional surge connectors. Gantrail’s unique design has proven itself in many years of service. More...

Crane buffers
Cranes must be protected from impact with structure and other cranes. Gantrail supply a range of high quality hydraulic buffers that optimise energy dissipation from excessive crane impacts. More...

SERVICES
Installation services
Some of the skills required in crane rail installation are not readily available. Gantrail work with our skilled technical teams to supervise and/or install rails all over the world Rail welding Crane and railway rails are made from high carbon wear resistant steels. They are difficult to weld and require special techniques such as Thermit and enclosed arc methods. Gantrail use these for customers. More...

Inspection care and maintenance of tracks
Gantrail offer a full service in including alignment surveys and condition reporting. More...

Design and technical support
Many design engineers seldom need to detail a crane installation. Gantrail are doing it every day. We offer a service at no charge to our customers. Where design codes specify requirement, these are followed otherwise Gantrail rely on their many years of experience all around the world. Calculations are a normal part of our support for customers. Gantrail have a considerable technical resource and can offer support in the full range of crane/rail/structure matters. More...